Description
High Mast Light Pole
Incepted in the year 2008, HAITONG is consistently growing in the respected domain by offering high quality products to all commercial patrons. HAITONG is leading manufacturer and China national project participator, LED High Mast Light poles, LED Solar Street Light poles, LED Isolated Drivers, LED Bay Light, LED Street Light etc, which are finely prepared by professionals following preset standards for quality. Professionals follow latest technology for the manufacturing of these products in order to be ahead in competitive market. We ensure longer working life of these products.
Please check high mast light pole parameters below, Contact David K Chin for special needs.
Pole specification
| Pole Height | From 15 m to 50m |
| Installation Place | Airport ,seaport,plaza,stadium ,square,highway station,street way ,etc |
| Shape | round or polygon |
| Steel Material | Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 |
| Torrance of Dimension | +- 2% |
| The Luminaire | 400 W- 5000 W led flood light or high pressure sodium flood light , light extension : up to 30 000 m² |
| Lantern Carriage | Various figure of selection ,material with hot dip galvanization steel frame |
| Raising and Lowering System | Motor assembly is fixed in the inner of pole with raising speed of 3~5 meter per minute Equipped e; anti–ferromagnetism brake and break -proof device,manual operation applied under power cut |
| Electric Appliance Control Device | Electric appliance box to be be the hold of the pole ,raising and lowering operation could be 5 meter away from the mast through wire . Time control and power control could be equipped to fulfill full-load lighting mode or dimming mode |
| Surface Treatment | Hot dip galvanized Following ASTM A 123, color polyester powders or any other technique standards as client required. |
| Joint of Poles | Inserting mode,inner flange mode,face to face joint mode . |
| Earthquake Resistance Design | Against earthquake of 8 grade |
| Wind Withstand | 140 Km/Hour |
| Welding | We has past flaw testing.Internal and external double welding makes the welding in shape |
| Thickness | From 6 mm to 20 mm |
| Production Process | Raw material test→Cutting→Molding or bending →Welding (longitudinal )→Dimension verify→Flange welding→Hole drilling→Calibration→Deburring→Galvanization or powder coating , painting→Recalibration→Thread→Packages |
| Packages | Our poles as normal cover by felt at the top and bottom ,anyway also can following to client requirement |
