CB/Ce Approved LED Emergency Light, LED Backup Light, LED Emergency Surface Light

Model NO.
LEK03-6NC

Battery Type
Ni-Cd Battery

Emitting Color
Cool White

Material
Aluminum

Certification
CE

Transport Package
Color Box

Specification
140*125mm

Trademark
flolite

Origin
China

HS Code
8504401400

Production Capacity
3000PCS/Day

Description

CB Approved 2x3W LED Emergency light with Ni-Cd batteries 3Hours Backup

Relevant Standard

EN 60598-1

EN 61000-3-2

IEC 60598-1

IEC61000-3-2

EN 60598-2-22

EN 61000-3-3

IEC 60598-2-22

IEC 61000-3-3

EN 61347-1

EN 62471

IEC 61347-1

IEC 62471

EN 61347-2-13

EN 62493

IEC 61347-2-13

IEC 62493

EN 61347-2-7

EN 55015

IEC 61347-2-7

IEC 55015

EN 62778

EN62031

IEC 62778

IEC62031

Product Parameter

Model No. :

LEK03-6NC

Battery:

Ni-Cd, 3.6V 2000mAh

LED Chips:

Cree xt-e

Luminous Flux:

150lm

 

Power Consumption:

2x3W

Input Voltage:

AC220-240V~50/60Hz

Charge time:

24Hours

Emergency duration:

3Hours

ta:

0~35ºC

Max. Case Temp.:

70ºC

Protection Class:

II

IP Rating:

IP20

Power factor:

0.5

Supply current:

0.04A

Operation:

Maintained or Non-maintained

Function:

MANUAL test

Light distribution:

Path way (Standard)

  
 

Door way (Optional)

  

 

Maintained and Non-Maintained Function

 ∷  Maintained: Assemble wire connector

∷  Non-Maintained: Disassemble the wire connector

Photometrics

                      LEK03 Narrow Lens(Path Way)                                                          LEK03 Wide Lens(Door Way)

Dimension

Installation Diagram

                                   Wire preparation:

                                   0.5~1.5mm²

Special Note

∷ This product should be installed by a registered electrician in accordance with local standard and electrical regulations.

∷ Take care to ensure the mains supply is isolated before installation, Check the unit label for correct supply voltage and frequency.

∷ The whole luminaire should be replaced when they no longer meet their rated duration of operation after the corresponding recharge period. 

∷∷ Normal Operation: The green indicator light on the bottom unit stays on. The LED will go out if the mains supply fails, if the internal charger is malfunctions, or if the unit is in test mode. The fixture must be charge 24 hours after installation.

∷∷ Battery: The battery is not replaceable; When battery no longer meet its rated duration of operation, after corresponding recharge period, the whole luminaire shall be replaced.

∷∷ LED: The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced;

∷∷ Test Switch: If pressed the test switch, LED indicator will go out and the fixture will operate from its battery supply.

∷∷ Auto Self Testing: Every 7 days for function tests and every 26 weeks for duration tests.