Full Power 12 Hrs Economic Design 60W LED Solar Outdoor Lights

Product Specification
4.0KWH Design, Lighting Time: 11-12 Hours/Nights*3-5 Overcast Weather

 
5.0KWH Design, Lighting Time: 11-12 Hours/Nights*3-5 Overcast Weather

Main Components Of Solar Street Lights

	LED Street Lamp Producing Power 9W-250W High Lumen:150-150LM/W;Lifespan:50000-100000Hrs
	* Technical Descriptions
	* Lamp Body: High-Pressure Die-Casting Aluminum. Corrosion Resistant,IP65 or IP68
	* Application with Polyester Substance in its Surface.
	* Reflector: High Purity Aluminum or Stainless Steel SS304,Mirror Polish.
	* LED Cooler: Aluminum Material, Producing By Module
	* Cover Glass: High Strength and High Transparent Toughened Glass
	* Fastener Bolt and Screws: Stainless Steel, Anti-theft screw.
	* Ambient Temp:-40~+50°C;Humidity:10%~95%
	* Arm Diameter: 48 or 60mm
	Solar Panel 18V/36V–Poly &Mono Silicon 5W-310W
	* Before Production -Control Of  Raw Material Before Use -Data Recording Of  Raw Material—Products Tracebility
	* During production -Control At Each Step Of  Production -Validation Of Each Step By Quality Controllers
	* After production -Systematic Flash Test On Each PV Modules -Quality Control With IEC Compliance -Tests In Our Facility Testing -Optional: Third Party Inspection Before Shipment If Needing.
	* Limited Warranty -Workmanship for 5 years,90% of minimum power output over 12 years,80% over 20 years.  -The Solar Panels Are Manufactured In According To The IEC61215 Standards.Lifespan:20-25 Years
	Solar Battery 24AH~250AH/12V
	* Gelled battery, Sealed Type. Deep Cycle. Maintenance Free.
	* Real Green Power
	* Low Internal Resistance
	* Low Self-discharging Rate
	* Long-life Design
	* Wider Temperature Range
	* Extremely good discharge recovery ability
	Solar Charge Controller,IP68 Rating
	* Intellectual Control Technology Based On MCU And Special Software.
	* Adopt Tandem PWM Charge Control Method, So That The Voltage Loss Of Electrical Circuit Is Only The Half Of  Diode Charge, Charge Efficiency To Improve By 3% – 6%.
	* The Over Discharging Recovery Control And Automatically Floating Charge Control Can Prolong The Battery Service Life.
	* Battery Reverse Connection Protection, Over-voltage Protection And Under-voltage Protection.
	* Solar Module Reverse Connection Protection.
	* Automatically Recovery Output, Output Over Current Protection And Out Short Circuit Protection
	* Intelligent Time Control System, It Can Set Up 1-15 Hours Timing Or Delay Time ( Set Period To Resume Current Output, Two Period Can Be Set.)
	* Light Control, Time Control, Temperature Control
	* High-precision Voltage Control For The Battery Safety Work.
	* Waterproof Design.
	Steel Pole From 3M-12M For Street Lighting. 15M-50M For High Mast Pole
	* Material -Q345B/A572,Minimum Yield Strength>=345n/mm2 -Q235B/A36,Minimum Yield Strength>=235n/mm2
	* Shape -Round, Multi-pyramidal, Column form, Polygonal Or Conical
	* Production Process Raw Material Test→Cutting→Molding Or Bending →Welding (Longitudinal ) →Dimension Verify→Flange Welding→Hole Drilling →Calibration →Debur →Galvanization Or Powder Coating, Painting→Recalibration→Thread→Packaging

 
Advantage Of Solar Street Lighting Syatem
* Green Energy,Low Power Consumptiom,Save 60%~80% Than Others.
* Higher Power,Higher Brightness Intensity,Good Color Rendition.
* Save Electricity Cost,Save Electric Transformer And Cable Cost,Free Maintanenance.
* Environmental Impact—Eliminate Hazardous Disposal,Low Light Pollution,No Radiation.
* Longer Lifetime: Between 80000-100000 Hrs,If Lighting 12Hrs/Night Could Use At Least 12-22 Years.
* Less Heat Generated Compared To Other Sourses.
* Downward Orientation Of Light Could Adjust Lighting Angles And Lighting Range And Shape On The Ground To      Meet The Road-rectangular,Other Lighting Source Just Could Give Common Round Shape And Small Lighting        Range.

Payment & Delivery