Description
| Product name | street light pole |
| Height | From 3 m to 35 m |
| Surface treatment | Hot dip galvanizing meets Chinese standard GB / T 13912-2002 or American standard ASTM A123 or AS / NZS 4680:2006,color polyester power or any other standard by client required. |
| Shape | Conical, octagonal, square, cylinder |
| Lamp power | 20 W- 400 W (HPS/MH) / 220V (+-10%) /50Hz |
| Material | Usually Q345B/A572, Q235B/A36, Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, ST52 |
| Spare Parts | Parts for connection or installation |
| Thickness | 1 mm to 30 mm |
| Welding standard | AWS D1.1, both internal and external welding |
| Minimum yield strength | 235mpa |
| Minimum ultimate tensile strength | 490mpa |
| Max ultimate tensile strength | 620 mpa |
| Joint of Poles | Insert mode,inner flange mode,face to face joint mode |
| Wind resistant grade | 36.9m/s |
| Design basis | CECS236:2008 |
| Basic wind pressure | 0.65KN/m |
| Weld grade | The section weld is a secondary weld and the fillet weld is a secondary weld |
Production Process | Raw material test → Steel plate cutting →Molding or bending →Welding (longitudinal )→Dimension verify →Flange cutting →Flange punching→Calibration → Reinforcing rib cutting→ Welding(reinforcing rib and flange)→ Galvanization or powder coating ,painting→polishing→Recalibration →Thread →Packages |
