Description
CCTV Schematic Diagram:
Our integrated All-in-one 100% solar energy powered Solar Street LED Lamp which integrates the green-energy parts solar panel, Bridgelux/ Epistar LED chips, LiFePO4 (lithium iron phosphate) battery, intelligent control system, Panasonic sensor, etc. into one aluminum alloy housing. Long service life, high-luminance, energy saving and maintenance free. Very easy to install and no cable needed. This lamp is brighter compared with normal sodium light, 1W led chip brightness as 5W of normal sodium light, and at the same time, it’s convenient for transportation and high safety.
Solar Street Light Specification:
| Parameter / Power | 10Wt | 20Wt | 30Wt | 40Wt | 50Wt | 60Wt | 70Wt | 80Wt | 100Wt | 120Wt | |
| Solar Panel | Max Power(18V) | 20Wp | 40Wp | 60Wp | 60Wp | 70Wp | 80Wp | 100Wp | 100Wp | 130Wp | 150Wp |
| Type | High Efficiency Mono-Crystalline Silicon | ||||||||||
| Life Time | 25+ Years | ||||||||||
| Battery | Type | 12.8Vol LiFePO4 lithium | |||||||||
| Life Time | 8+ Years | ||||||||||
| Led Lamp With IP68 Sensor | Max Power(12V) | 10Wt | 20Wt | 30Wt | 40Wt | 50Wt | 60Wt | 70Wt | 80Wt | 100Wt | 120Wt |
| Lumen | 150-200LM/Wt | ||||||||||
| LED Chip | Bridgelux/Osram/Cree with high brightness | ||||||||||
| Viewing Angle | 60°x140° | ||||||||||
| Life Time | 100000 Hours | ||||||||||
| Charge Time | By Sun | <8Hrs | |||||||||
| Discharge Time | Full Power Mode | >12Hrs | |||||||||
| Saving Power Mode | >36Hrs 3~7 backup days | ||||||||||
| Working Temp | Range( ºC ) | -20ºC~+70ºC | |||||||||
| Color Temp | Range(K) | 3500-5000K,6000-6500K | |||||||||
| Main Material | Rust-proof Aluminium Alloy + PC | ||||||||||
| Controller | 12V/24V 10A; IP68 waterproof level ; Over load/Over Charging/Over Discharge/Short circuit protection ALS/VFT/TCS | ||||||||||
| Function | Light on at dusk, light off at dawn auto/ Microwave infrared sensor detection. | ||||||||||
| Certificate | CE / ROHS / IP65/ ISO9001 / LM80 | ||||||||||
| Warranty Period | 3-8 Years (Optional) | ||||||||||
FAQ:
Q. How to proceed an order for led light?
Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q: How to install?
To place the light pole into the best spot with good day lighting.The solar led light pole should be the length 4-10m, the thickness 3.0mm with material iron or steel, the diameter 89-110mm.The parts should be showed cleared when open the packing.Place the lamp on the pole by its sleeve, special screw should be used and steady installation should be ensured.It could work when you open the switch without any adjustment. Make the solar panel face south while installing. Meanwhile, you can adjust the angel between the lamp head and level (as follows), you’d better reconcile the lamp head with local latitude.Notice:Please Turn On swith before you install lamp.
Q What’s the payment terms?
We could accept pay by TT / Western Union.And we believe that m ore kinds of payment terms would be accepted in the future.
Q What about after-sale service?
We do not bear any freight cost if product was damaged by human during warranty.But the freight(back and forth ) is for our account if prouct was damaged by itself.We will provide free parts to replace during 5 years warranty.
Finally,welcome to ask more questions for any sides and time.